And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.037
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.534
And
I accept adding "cowsay" to Additional Software
3.676
And
Additional Software is correctly configured for package "cowsay"
0.625
And
I shutdown Tails and wait for the computer to power off
8.275
And
I start Tails from USB drive "__internal" with network unplugged
38.343
And
I enable persistence
6.945
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.372
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.276
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.019
And
available upgrades have been checked
2.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
9.429
And
I can open the Additional Software configuration window from the notification
2.599
And
I shutdown Tails and wait for the computer to power off
17.629
And
I start Tails from USB drive "__internal" with network unplugged
37.681
And
I enable persistence
5.593
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.851
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.081
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066