And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.204
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.426
And
I accept adding "cowsay" to Additional Software
5.238
And
Additional Software is correctly configured for package "cowsay"
0.760
And
I shutdown Tails and wait for the computer to power off
8.332
And
I start Tails from USB drive "__internal" with network unplugged
40.584
And
I enable persistence
7.354
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
12.224
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.049
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.532
And
I can open the Additional Software configuration window from the notification
2.945
And
I shutdown Tails and wait for the computer to power off
22.380
And
I start Tails from USB drive "__internal" with network unplugged
42.199
And
I enable persistence
7.389
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
12.028
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057