And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.332
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.263
And
I accept adding "cowsay" to Additional Software
5.210
And
Additional Software is correctly configured for package "cowsay"
0.727
And
I shutdown Tails and wait for the computer to power off
4.347
And
I start Tails from USB drive "__internal" with network unplugged
40.067
And
I enable persistence
6.906
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
11.263
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.040
And
available upgrades have been checked
2.167
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.517
And
I can open the Additional Software configuration window from the notification
2.526
And
I shutdown Tails and wait for the computer to power off
17.951
And
I start Tails from USB drive "__internal" with network unplugged
40.420
And
I enable persistence
7.141
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
11.755
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070