And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.881
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.398
And
I accept adding "cowsay" to Additional Software
3.640
And
Additional Software is correctly configured for package "cowsay"
0.637
And
I shutdown Tails and wait for the computer to power off
7.932
And
I start Tails from USB drive "__internal" with network unplugged
36.651
And
I enable persistence
5.512
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.473
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.015
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.452
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
13.252
And
I start Tails from USB drive "__internal" with network unplugged
36.637
And
I enable persistence
5.483
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.834
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058