And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.596
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.590
And
I accept adding "cowsay" to Additional Software
3.826
And
Additional Software is correctly configured for package "cowsay"
0.683
And
I shutdown Tails and wait for the computer to power off
4.385
And
I start Tails from USB drive "__internal" with network unplugged
38.333
And
I enable persistence
6.468
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.148
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.013
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.537
And
I can open the Additional Software configuration window from the notification
2.698
And
I shutdown Tails and wait for the computer to power off
22.295
And
I start Tails from USB drive "__internal" with network unplugged
36.334
And
I enable persistence
5.828
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.682
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083