And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.164
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.084
And
I accept adding "cowsay" to Additional Software
5.022
And
Additional Software is correctly configured for package "cowsay"
0.544
And
I shutdown Tails and wait for the computer to power off
8.054
And
I start Tails from USB drive "__internal" with network unplugged
36.585
And
I enable persistence
7.058
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
10.376
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.288
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.024
And
available upgrades have been checked
2.198
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.584
And
I can open the Additional Software configuration window from the notification
2.695
And
I shutdown Tails and wait for the computer to power off
22.477
And
I start Tails from USB drive "__internal" with network unplugged
37.605
And
I enable persistence
6.771
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.264
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.267
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055