And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.226
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.930
And
I accept adding "cowsay" to Additional Software
5.065
And
Additional Software is correctly configured for package "cowsay"
0.855
And
I shutdown Tails and wait for the computer to power off
8.189
And
I start Tails from USB drive "__internal" with network unplugged
39.777
And
I enable persistence
5.939
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
11.978
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.299
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.139
And
the network is plugged
0.026
And
available upgrades have been checked
2.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.634
And
I can open the Additional Software configuration window from the notification
2.603
And
I shutdown Tails and wait for the computer to power off
17.894
And
I start Tails from USB drive "__internal" with network unplugged
39.107
And
I enable persistence
7.545
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
11.569
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.042
Then
the Additional Software upgrade service has started
0.077
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061