And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:47.842
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.712
And
I accept adding "cowsay" to Additional Software
3.735
And
Additional Software is correctly configured for package "cowsay"
0.665
And
I shutdown Tails and wait for the computer to power off
4.261
And
I start Tails from USB drive "__internal" with network unplugged
37.696
And
I enable persistence
6.808
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.418
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.016
And
available upgrades have been checked
1.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.075
And
I can open the Additional Software configuration window from the notification
2.598
And
I shutdown Tails and wait for the computer to power off
23.124
And
I start Tails from USB drive "__internal" with network unplugged
38.372
And
I enable persistence
5.786
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
10.428
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.261
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082