And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.471
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.968
And
I accept adding "cowsay" to Additional Software
5.089
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
8.526
And
I start Tails from USB drive "__internal" with network unplugged
39.433
And
I enable persistence
6.743
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
10.975
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.260
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.015
And
available upgrades have been checked
3.304
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.562
And
I can open the Additional Software configuration window from the notification
2.582
And
I shutdown Tails and wait for the computer to power off
4.741
And
I start Tails from USB drive "__internal" with network unplugged
40.632
And
I enable persistence
7.293
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.544
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.556
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079