And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.747
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.841
And
I accept adding "cowsay" to Additional Software
5.068
And
Additional Software is correctly configured for package "cowsay"
0.674
And
I shutdown Tails and wait for the computer to power off
8.015
And
I start Tails from USB drive "__internal" with network unplugged
37.086
And
I enable persistence
5.662
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
9.771
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.480
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.511
And
I can open the Additional Software configuration window from the notification
2.517
And
I shutdown Tails and wait for the computer to power off
22.456
And
I start Tails from USB drive "__internal" with network unplugged
36.944
And
I enable persistence
6.806
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.799
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.072
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064