And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.728
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.057
And
I accept adding "cowsay" to Additional Software
5.073
And
Additional Software is correctly configured for package "cowsay"
0.730
And
I shutdown Tails and wait for the computer to power off
8.120
And
I start Tails from USB drive "__internal" with network unplugged
37.929
And
I enable persistence
6.548
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
10.056
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.522
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.013
And
available upgrades have been checked
2.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.975
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
17.662
And
I start Tails from USB drive "__internal" with network unplugged
37.480
And
I enable persistence
6.516
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.861
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.636
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058