And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.298
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.919
And
I accept adding "cowsay" to Additional Software
4.783
And
Additional Software is correctly configured for package "cowsay"
0.691
And
I shutdown Tails and wait for the computer to power off
4.095
And
I start Tails from USB drive "__internal" with network unplugged
38.799
And
I enable persistence
7.303
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
10.617
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.639
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.020
And
available upgrades have been checked
2.174
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.618
And
I can open the Additional Software configuration window from the notification
2.716
And
I shutdown Tails and wait for the computer to power off
23.264
And
I start Tails from USB drive "__internal" with network unplugged
38.292
And
I enable persistence
6.549
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.094
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064