And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.980
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.535
And
I accept adding "cowsay" to Additional Software
4.998
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
8.189
And
I start Tails from USB drive "__internal" with network unplugged
38.454
And
I enable persistence
6.810
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.417
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.018
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.577
And
I can open the Additional Software configuration window from the notification
2.634
And
I shutdown Tails and wait for the computer to power off
23.295
And
I start Tails from USB drive "__internal" with network unplugged
38.291
And
I enable persistence
6.969
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.564
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.087
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080