And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.402
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.120
And
I accept adding "cowsay" to Additional Software
5.039
And
Additional Software is correctly configured for package "cowsay"
0.742
And
I shutdown Tails and wait for the computer to power off
3.956
And
I start Tails from USB drive "__internal" with network unplugged
37.361
And
I enable persistence
6.205
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
10.212
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.251
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.443
And
I can open the Additional Software configuration window from the notification
2.552
And
I shutdown Tails and wait for the computer to power off
17.461
And
I start Tails from USB drive "__internal" with network unplugged
37.007
And
I enable persistence
5.684
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.185
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.284
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.079
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061