And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.364
And
I configure APT to prefer an old version of cowsay
0.065
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.607
And
I accept adding "cowsay" to Additional Software
4.986
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
8.204
And
I start Tails from USB drive "__internal" with network unplugged
38.613
And
I enable persistence
6.914
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.577
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.648
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.016
And
available upgrades have been checked
2.280
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.131
And
I can open the Additional Software configuration window from the notification
2.573
And
I shutdown Tails and wait for the computer to power off
17.633
And
I start Tails from USB drive "__internal" with network unplugged
39.435
And
I enable persistence
6.890
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.105
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065