And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.562
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.526
And
I accept adding "cowsay" to Additional Software
3.605
And
Additional Software is correctly configured for package "cowsay"
0.516
And
I shutdown Tails and wait for the computer to power off
4.256
And
I start Tails from USB drive "__internal" with network unplugged
36.400
And
I enable persistence
6.133
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
9.429
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.016
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.505
And
I can open the Additional Software configuration window from the notification
2.554
And
I shutdown Tails and wait for the computer to power off
13.394
And
I start Tails from USB drive "__internal" with network unplugged
35.580
And
I enable persistence
5.558
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.862
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059