And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.956
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.882
And
I accept adding "cowsay" to Additional Software
5.259
And
Additional Software is correctly configured for package "cowsay"
0.808
And
I shutdown Tails and wait for the computer to power off
4.056
And
I start Tails from USB drive "__internal" with network unplugged
38.572
And
I enable persistence
6.426
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.227
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.017
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.110
And
I can open the Additional Software configuration window from the notification
2.602
And
I shutdown Tails and wait for the computer to power off
22.518
And
I start Tails from USB drive "__internal" with network unplugged
37.987
And
I enable persistence
6.788
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.303
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.588
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058