And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.439
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.013
And
I accept adding "cowsay" to Additional Software
5.036
And
Additional Software is correctly configured for package "cowsay"
0.882
And
I shutdown Tails and wait for the computer to power off
8.522
And
I start Tails from USB drive "__internal" with network unplugged
39.680
And
I enable persistence
7.253
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.019
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.020
And
available upgrades have been checked
2.214
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.744
And
I can open the Additional Software configuration window from the notification
2.907
And
I shutdown Tails and wait for the computer to power off
18.379
And
I start Tails from USB drive "__internal" with network unplugged
38.803
And
I enable persistence
7.484
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.786
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.251
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.110
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075