And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.501
And
I configure APT to prefer an old version of cowsay
0.018
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.771
And
I accept adding "cowsay" to Additional Software
4.864
And
Additional Software is correctly configured for package "cowsay"
0.749
And
I shutdown Tails and wait for the computer to power off
7.703
And
I start Tails from USB drive "__internal" with network unplugged
41.857
And
I enable persistence
7.200
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.814
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.021
And
available upgrades have been checked
1.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.980
And
I can open the Additional Software configuration window from the notification
2.685
And
I shutdown Tails and wait for the computer to power off
8.313
And
I start Tails from USB drive "__internal" with network unplugged
39.415
And
I enable persistence
7.191
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.350
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.582
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060