And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:47.863
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.466
And
I accept adding "cowsay" to Additional Software
5.384
And
Additional Software is correctly configured for package "cowsay"
0.663
And
I shutdown Tails and wait for the computer to power off
8.061
And
I start Tails from USB drive "__internal" with network unplugged
37.531
And
I enable persistence
5.678
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
11.845
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.017
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.558
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
13.864
And
I start Tails from USB drive "__internal" with network unplugged
37.241
And
I enable persistence
6.634
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.472
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073