And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.506
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.938
And
I accept adding "cowsay" to Additional Software
4.932
And
Additional Software is correctly configured for package "cowsay"
0.677
And
I shutdown Tails and wait for the computer to power off
4.133
And
I start Tails from USB drive "__internal" with network unplugged
37.289
And
I enable persistence
6.730
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.505
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.015
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.992
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
13.332
And
I start Tails from USB drive "__internal" with network unplugged
37.322
And
I enable persistence
6.897
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061