And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.299
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.253
And
I accept adding "cowsay" to Additional Software
3.745
And
Additional Software is correctly configured for package "cowsay"
0.693
And
I shutdown Tails and wait for the computer to power off
7.963
And
I start Tails from USB drive "__internal" with network unplugged
35.627
And
I enable persistence
5.548
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
8.845
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.017
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.480
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
22.524
And
I start Tails from USB drive "__internal" with network unplugged
35.074
And
I enable persistence
6.232
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
8.951
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054