And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.574
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.451
And
I accept adding "cowsay" to Additional Software
5.062
And
Additional Software is correctly configured for package "cowsay"
0.722
And
I shutdown Tails and wait for the computer to power off
8.347
And
I start Tails from USB drive "__internal" with network unplugged
37.467
And
I enable persistence
5.458
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
11.150
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.021
And
available upgrades have been checked
1.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.481
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
17.605
And
I start Tails from USB drive "__internal" with network unplugged
37.356
And
I enable persistence
5.643
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
12.316
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.549
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088