And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.267
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.595
And
I accept adding "cowsay" to Additional Software
3.802
And
Additional Software is correctly configured for package "cowsay"
0.700
And
I shutdown Tails and wait for the computer to power off
8.627
And
I start Tails from USB drive "__internal" with network unplugged
38.367
And
I enable persistence
6.431
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.637
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.520
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.014
And
available upgrades have been checked
2.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.546
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
17.334
And
I start Tails from USB drive "__internal" with network unplugged
37.536
And
I enable persistence
6.439
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
11.324
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055