And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.342
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.442
And
I accept adding "cowsay" to Additional Software
5.294
And
Additional Software is correctly configured for package "cowsay"
0.615
And
I shutdown Tails and wait for the computer to power off
8.054
And
I start Tails from USB drive "__internal" with network unplugged
38.034
And
I enable persistence
6.338
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.359
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.020
And
available upgrades have been checked
2.173
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.482
And
I can open the Additional Software configuration window from the notification
2.586
And
I shutdown Tails and wait for the computer to power off
12.498
And
I start Tails from USB drive "__internal" with network unplugged
38.990
And
I enable persistence
5.849
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.812
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055