And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.264
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.524
And
I accept adding "cowsay" to Additional Software
4.967
And
Additional Software is correctly configured for package "cowsay"
0.656
And
I shutdown Tails and wait for the computer to power off
8.109
And
I start Tails from USB drive "__internal" with network unplugged
38.208
And
I enable persistence
6.571
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
11.310
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
2.168
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.533
And
I can open the Additional Software configuration window from the notification
2.589
And
I shutdown Tails and wait for the computer to power off
12.245
And
I start Tails from USB drive "__internal" with network unplugged
37.329
And
I enable persistence
6.557
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.905
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057