And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.813
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.719
And
I accept adding "cowsay" to Additional Software
3.662
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
3.957
And
I start Tails from USB drive "__internal" with network unplugged
36.429
And
I enable persistence
5.365
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
9.349
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.016
And
available upgrades have been checked
2.170
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.487
And
I can open the Additional Software configuration window from the notification
2.525
And
I shutdown Tails and wait for the computer to power off
18.528
And
I start Tails from USB drive "__internal" with network unplugged
35.430
And
I enable persistence
5.459
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
8.791
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058