And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.283
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.831
And
I accept adding "cowsay" to Additional Software
5.000
And
Additional Software is correctly configured for package "cowsay"
0.602
And
I shutdown Tails and wait for the computer to power off
8.202
And
I start Tails from USB drive "__internal" with network unplugged
39.100
And
I enable persistence
5.454
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
11.574
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.017
And
available upgrades have been checked
2.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.473
And
I can open the Additional Software configuration window from the notification
2.488
And
I shutdown Tails and wait for the computer to power off
17.379
And
I start Tails from USB drive "__internal" with network unplugged
38.087
And
I enable persistence
6.565
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.595
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068