And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.015
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.898
And
I accept adding "cowsay" to Additional Software
5.205
And
Additional Software is correctly configured for package "cowsay"
0.579
And
I shutdown Tails and wait for the computer to power off
4.196
And
I start Tails from USB drive "__internal" with network unplugged
38.191
And
I enable persistence
5.885
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
9.995
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.270
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.021
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.660
And
I can open the Additional Software configuration window from the notification
2.610
And
I shutdown Tails and wait for the computer to power off
22.452
And
I start Tails from USB drive "__internal" with network unplugged
37.793
And
I enable persistence
5.852
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.636
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.517
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.100
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060