And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.187
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.113
And
I accept adding "cowsay" to Additional Software
5.052
And
Additional Software is correctly configured for package "cowsay"
0.810
And
I shutdown Tails and wait for the computer to power off
8.573
And
I start Tails from USB drive "__internal" with network unplugged
39.552
And
I enable persistence
7.399
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
12.114
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.026
And
available upgrades have been checked
1.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.620
And
I can open the Additional Software configuration window from the notification
2.791
And
I shutdown Tails and wait for the computer to power off
17.843
And
I start Tails from USB drive "__internal" with network unplugged
39.704
And
I enable persistence
7.471
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.218
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.090
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085