And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.132
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.491
And
I accept adding "cowsay" to Additional Software
3.721
And
Additional Software is correctly configured for package "cowsay"
0.797
And
I shutdown Tails and wait for the computer to power off
4.066
And
I start Tails from USB drive "__internal" with network unplugged
37.421
And
I enable persistence
6.546
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.449
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.019
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.546
And
I can open the Additional Software configuration window from the notification
2.585
And
I shutdown Tails and wait for the computer to power off
22.817
And
I start Tails from USB drive "__internal" with network unplugged
37.174
And
I enable persistence
5.636
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.206
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068