And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.476
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.038
And
I accept adding "cowsay" to Additional Software
4.860
And
Additional Software is correctly configured for package "cowsay"
0.597
And
I shutdown Tails and wait for the computer to power off
4.316
And
I start Tails from USB drive "__internal" with network unplugged
37.763
And
I enable persistence
6.723
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.254
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.251
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.017
And
available upgrades have been checked
1.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.044
And
I can open the Additional Software configuration window from the notification
2.585
And
I shutdown Tails and wait for the computer to power off
17.427
And
I start Tails from USB drive "__internal" with network unplugged
37.088
And
I enable persistence
6.746
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.084
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069