And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.890
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.706
And
I accept adding "cowsay" to Additional Software
3.666
And
Additional Software is correctly configured for package "cowsay"
0.559
And
I shutdown Tails and wait for the computer to power off
7.900
And
I start Tails from USB drive "__internal" with network unplugged
35.640
And
I enable persistence
6.407
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.483
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.015
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.471
And
I can open the Additional Software configuration window from the notification
2.535
And
I shutdown Tails and wait for the computer to power off
17.088
And
I start Tails from USB drive "__internal" with network unplugged
36.398
And
I enable persistence
6.500
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.841
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061