And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.973
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.472
And
I accept adding "cowsay" to Additional Software
3.649
And
Additional Software is correctly configured for package "cowsay"
0.601
And
I shutdown Tails and wait for the computer to power off
7.839
And
I start Tails from USB drive "__internal" with network unplugged
37.140
And
I enable persistence
6.398
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
9.161
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.519
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.016
And
available upgrades have been checked
1.137
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.985
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
18.586
And
I start Tails from USB drive "__internal" with network unplugged
36.289
And
I enable persistence
6.638
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.991
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076