And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.319
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.044
And
I accept adding "cowsay" to Additional Software
4.878
And
Additional Software is correctly configured for package "cowsay"
0.641
And
I shutdown Tails and wait for the computer to power off
8.243
And
I start Tails from USB drive "__internal" with network unplugged
38.127
And
I enable persistence
6.167
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
9.934
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.066
And
available upgrades have been checked
1.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.003
And
I can open the Additional Software configuration window from the notification
2.609
And
I shutdown Tails and wait for the computer to power off
17.385
And
I start Tails from USB drive "__internal" with network unplugged
37.840
And
I enable persistence
7.057
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.720
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067