And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.625
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.748
And
I accept adding "cowsay" to Additional Software
4.929
And
Additional Software is correctly configured for package "cowsay"
0.634
And
I shutdown Tails and wait for the computer to power off
8.048
And
I start Tails from USB drive "__internal" with network unplugged
39.659
And
I enable persistence
7.450
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
12.033
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
1.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.069
And
I can open the Additional Software configuration window from the notification
2.626
And
I shutdown Tails and wait for the computer to power off
13.620
And
I start Tails from USB drive "__internal" with network unplugged
39.091
And
I enable persistence
7.312
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.980
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.303
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.043
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075