And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.728
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.342
And
I accept adding "cowsay" to Additional Software
4.887
And
Additional Software is correctly configured for package "cowsay"
0.627
And
I shutdown Tails and wait for the computer to power off
8.574
And
I start Tails from USB drive "__internal" with network unplugged
39.085
And
I enable persistence
6.936
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
10.834
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.015
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.143
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
18.024
And
I start Tails from USB drive "__internal" with network unplugged
39.444
And
I enable persistence
6.866
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.723
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067