And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.568
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.213
And
I accept adding "cowsay" to Additional Software
4.923
And
Additional Software is correctly configured for package "cowsay"
0.754
And
I shutdown Tails and wait for the computer to power off
7.135
And
I start Tails from USB drive "__internal" with network unplugged
39.477
And
I enable persistence
7.239
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
11.903
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.478
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.017
And
available upgrades have been checked
1.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.606
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
18.726
And
I start Tails from USB drive "__internal" with network unplugged
40.872
And
I enable persistence
6.696
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.497
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055