And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.846
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
10.290
And
I accept adding "cowsay" to Additional Software
6.049
And
Additional Software is correctly configured for package "cowsay"
0.750
And
I shutdown Tails and wait for the computer to power off
4.861
And
I start Tails from USB drive "__internal" with network unplugged
40.770
And
I enable persistence
7.053
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.465
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.277
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.025
And
available upgrades have been checked
2.200
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.549
And
I can open the Additional Software configuration window from the notification
2.570
And
I shutdown Tails and wait for the computer to power off
18.036
And
I start Tails from USB drive "__internal" with network unplugged
40.908
And
I enable persistence
7.783
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.666
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.315
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.127