And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.059
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.210
And
I accept adding "cowsay" to Additional Software
3.720
And
Additional Software is correctly configured for package "cowsay"
0.567
And
I shutdown Tails and wait for the computer to power off
8.069
And
I start Tails from USB drive "__internal" with network unplugged
36.614
And
I enable persistence
6.363
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
9.591
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.469
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.013
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.124
And
I can open the Additional Software configuration window from the notification
2.582
And
I shutdown Tails and wait for the computer to power off
22.288
And
I start Tails from USB drive "__internal" with network unplugged
36.697
And
I enable persistence
6.583
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.188
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056