And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.524
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.415
And
I accept adding "cowsay" to Additional Software
3.641
And
Additional Software is correctly configured for package "cowsay"
0.557
And
I shutdown Tails and wait for the computer to power off
7.871
And
I start Tails from USB drive "__internal" with network unplugged
35.756
And
I enable persistence
6.393
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.110
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.016
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.429
And
I can open the Additional Software configuration window from the notification
2.522
And
I shutdown Tails and wait for the computer to power off
13.244
And
I start Tails from USB drive "__internal" with network unplugged
35.451
And
I enable persistence
5.476
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.896
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062