And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.600
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.805
And
I accept adding "cowsay" to Additional Software
3.618
And
Additional Software is correctly configured for package "cowsay"
0.586
And
I shutdown Tails and wait for the computer to power off
8.268
And
I start Tails from USB drive "__internal" with network unplugged
36.672
And
I enable persistence
5.741
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
9.937
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.014
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.419
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
16.991
And
I start Tails from USB drive "__internal" with network unplugged
35.803
And
I enable persistence
5.845
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.278
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077