And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.870
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.799
And
I accept adding "cowsay" to Additional Software
4.827
And
Additional Software is correctly configured for package "cowsay"
0.744
And
I shutdown Tails and wait for the computer to power off
8.188
And
I start Tails from USB drive "__internal" with network unplugged
36.728
And
I enable persistence
5.905
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.345
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.013
And
available upgrades have been checked
3.182
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.644
And
I can open the Additional Software configuration window from the notification
2.623
And
I shutdown Tails and wait for the computer to power off
18.691
And
I start Tails from USB drive "__internal" with network unplugged
37.723
And
I enable persistence
7.274
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.592
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075