And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.317
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.577
And
I accept adding "cowsay" to Additional Software
4.975
And
Additional Software is correctly configured for package "cowsay"
0.594
And
I shutdown Tails and wait for the computer to power off
7.986
And
I start Tails from USB drive "__internal" with network unplugged
38.779
And
I enable persistence
5.743
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
11.633
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.014
And
available upgrades have been checked
2.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.466
And
I can open the Additional Software configuration window from the notification
2.494
And
I shutdown Tails and wait for the computer to power off
17.445
And
I start Tails from USB drive "__internal" with network unplugged
37.982
And
I enable persistence
6.731
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.103
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068