And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.107
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.112
And
I accept adding "cowsay" to Additional Software
4.841
And
Additional Software is correctly configured for package "cowsay"
0.677
And
I shutdown Tails and wait for the computer to power off
4.236
And
I start Tails from USB drive "__internal" with network unplugged
39.251
And
I enable persistence
7.044
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.107
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.015
And
available upgrades have been checked
3.254
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.486
And
I can open the Additional Software configuration window from the notification
2.595
And
I shutdown Tails and wait for the computer to power off
17.844
And
I start Tails from USB drive "__internal" with network unplugged
39.343
And
I enable persistence
6.881
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.003
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062