And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.472
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.989
And
I accept adding "cowsay" to Additional Software
4.944
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
4.241
And
I start Tails from USB drive "__internal" with network unplugged
37.964
And
I enable persistence
6.377
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.682
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.525
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.018
And
available upgrades have been checked
2.183
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.518
And
I can open the Additional Software configuration window from the notification
2.594
And
I shutdown Tails and wait for the computer to power off
17.484
And
I start Tails from USB drive "__internal" with network unplugged
36.811
And
I enable persistence
6.378
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.361
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.139