And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.791
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.479
And
I accept adding "cowsay" to Additional Software
4.966
And
Additional Software is correctly configured for package "cowsay"
0.904
And
I shutdown Tails and wait for the computer to power off
7.309
And
I start Tails from USB drive "__internal" with network unplugged
40.238
And
I enable persistence
6.733
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
11.932
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.533
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.016
And
available upgrades have been checked
2.213
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.456
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
17.937
And
I start Tails from USB drive "__internal" with network unplugged
40.536
And
I enable persistence
6.829
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.624
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.091
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054