And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.246
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.811
And
I accept adding "cowsay" to Additional Software
4.970
And
Additional Software is correctly configured for package "cowsay"
0.674
And
I shutdown Tails and wait for the computer to power off
8.181
And
I start Tails from USB drive "__internal" with network unplugged
37.934
And
I enable persistence
6.899
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.165
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.019
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.575
And
I can open the Additional Software configuration window from the notification
2.576
And
I shutdown Tails and wait for the computer to power off
17.420
And
I start Tails from USB drive "__internal" with network unplugged
38.014
And
I enable persistence
6.843
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.793
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052