And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.404
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.411
And
I accept adding "cowsay" to Additional Software
3.623
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
7.880
And
I start Tails from USB drive "__internal" with network unplugged
35.814
And
I enable persistence
6.567
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.710
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.017
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.494
And
I can open the Additional Software configuration window from the notification
2.511
And
I shutdown Tails and wait for the computer to power off
22.169
And
I start Tails from USB drive "__internal" with network unplugged
35.994
And
I enable persistence
6.425
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.167
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078