And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.853
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.623
And
I accept adding "cowsay" to Additional Software
3.664
And
Additional Software is correctly configured for package "cowsay"
0.565
And
I shutdown Tails and wait for the computer to power off
7.919
And
I start Tails from USB drive "__internal" with network unplugged
36.322
And
I enable persistence
6.418
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.658
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.015
And
available upgrades have been checked
2.182
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.380
And
I can open the Additional Software configuration window from the notification
2.516
And
I shutdown Tails and wait for the computer to power off
18.371
And
I start Tails from USB drive "__internal" with network unplugged
35.777
And
I enable persistence
5.493
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.040
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.165
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066